The AD2000 Automatic door system has been designed and manufactured in Australia by Trimec Technology for retrofitting to existing single & bi-parting fire rated sliding doors or gates.
The AD2000 system will even operate in the event of a mains power failure via a battery powered system and has been designed to be effective for up to 24 hours without power in standby mode.
The AD2000 electronics, battery and the mechanical system are automatically tested and monitored every 25 minutes.
No Trailing Cables
No Read Switch
Self Programming
CSIRO APPROVED FOR FIRE DOOR APPLICATIONS
Features:
- Unique Self Programming System Simply move the door from open to closed position.
- Suitable For Sliding Doors/Gates Suitable for doors/gates weighing 200kg to 2000kg or with a max pull resistance for up to 440 N (100 lbsl)
- Fire Door Control System Compatible with new or existing fire systems -”door normally open”.
- Access Control System (via optional plug-in PCB) In Access Control Mode (door normally closed) any connected locks are turned off in the event of fire, to allow free egress.
- Conveniently Supplied In Kit Form3 box kit (as shown). Installation involves no trailing cables!
- Retrofit To new or existing sliding doors. Adaptor plates enable quick installation.
- Obstruction Sensing If the door encounters an obstruction whilst closing, the door will retract and attempt to reclose. After 6 attempts the door will park and the controller will send a signal that the door failed to close.
- Full Automatic Self Test Every 25 Minutes Door moves back and forth 25mm every 25 minutes to check battery, electrical and mechanical system.
- Key Override For fire door services, key open or close.
- Audible Alarm and Strobe Light Outputs
- Movement Detector Inputs Apply to both, fire and access systems.
Call us for inquiry
021 935 20 750 / 087 877 123 328
Accept retail ( 1 door ) and Project Access control
