Access Control Indonesia

EP.L1000 Lift / Elevator Master Controller

2008-11-29T23:14:00.001-08:00

Key Features

Card Users & Transactions
L1000 supports a minimum of 10,000 users and 15,000 transactions with expandable memories.

I/O Functions Available
L1000 can be connected to 8 units of EP.DFP to provides up to 64 outputs or floor.

RS485 Communication
L1000 use 2 wire RS485 communication which allow the EP.DFP to be linked with multidrop architecture.

IP Address Setting
All L1000 controller address is programmed with IP address format.

Internal Watchdog Function
All L1000 controller are equipped with internal watchdog function.

Minimum Support
Build in with surge protection up to 20kA, reverse polarity protection for incoming power.

Support Various Reader Technologies
L1000 controller can support almost any reader technologies in the market such as Wiegand, HID iCLASS, MIFARE, ABA track II, Integrated keypad and etc.

Call us for Inquiry : 087 877 123 328

We provide Access Control for Door ; Lift; Absensi device; and many more for :

Banking
Pertambangan
Kapal tangker dengan kapal kecil
Pabrik
Perkantoran
Pelabuhan alarm
Perhutanan
Cluster
Private home

ES8000 V-Lock

2008-11-29T06:58:00.001-08:00

Trimec Technology's new V-Lock introduces patented features that overcome the problems of door misalignment in 180 degree swinging doors and the problems of side load.

This new high-torque motorised lock can be concealed from view or surface mounted, and has the worlds' first fail-open motor locking mechanism which eliminates the need and cost of an additional key override

Features:

SIDE LOAD - PRE LOAD Capable Lock will unlock with up to 15kg of side pressure, when wired in 3 wire mode. (1 x Permanent Power, (positive 12-24vdc) wire Negative (0 volt return) wire, and 1 x Switching input (positive 12-24vdc) wire.
Door misalignment of up to 3.5mm +/-
Power to Lock ( Fail Safe) / Power to Open (Fail Secure) field configurable.
HIGH TORQUE Motorised locking and unlocking (3 wire mode)
Overcomes the issues of side pressure caused by differential air pressure.
High Speed OperationUnlocks in less than 1 second
Glass Door Accessory kit

For inquiry call us at

021 935 20 750/ 087 877 123328

AD 2000

2008-11-29T06:49:00.000-08:00

The AD2000 Automatic door system has been designed and manufactured in Australia by Trimec Technology for retrofitting to existing single & bi-parting fire rated sliding doors or gates.

The AD2000 system will even operate in the event of a mains power failure via a battery powered system and has been designed to be effective for up to 24 hours without power in standby mode.

The AD2000 electronics, battery and the mechanical system are automatically tested and monitored every 25 minutes.

No Trailing Cables
No Read Switch
Self Programming

CSIRO APPROVED FOR FIRE DOOR APPLICATIONS

Features:

Unique Self Programming System Simply move the door from open to closed position.
Suitable For Sliding Doors/Gates Suitable for doors/gates weighing 200kg to 2000kg or with a max pull resistance for up to 440 N (100 lbsl)
Fire Door Control System Compatible with new or existing fire systems -”door normally open”.
Access Control System (via optional plug-in PCB) In Access Control Mode (door normally closed) any connected locks are turned off in the event of fire, to allow free egress.
Conveniently Supplied In Kit Form3 box kit (as shown). Installation involves no trailing cables!
Retrofit To new or existing sliding doors. Adaptor plates enable quick installation.
Obstruction Sensing If the door encounters an obstruction whilst closing, the door will retract and attempt to reclose. After 6 attempts the door will park and the controller will send a signal that the door failed to close.
Full Automatic Self Test Every 25 Minutes Door moves back and forth 25mm every 25 minutes to check battery, electrical and mechanical system.
Key Override For fire door services, key open or close.
Audible Alarm and Strobe Light Outputs
Movement Detector Inputs Apply to both, fire and access systems.

Call us for inquiry

021 935 20 750 / 087 877 123 328

Accept retail ( 1 door ) and Project Access control